How to Set Up a Thread Lock System Shisha?

Thread Lock System Shisha Set Up

Here at Melbourne Hookah you will find a wide range of hookah/Shisha with a thread lock system, in various designs, colours, sizes and materials. The thread lock system on a Shisha is one of the most modern closure system. The stem of the hookah is connected with a screw thread which is incorporated into the base of the hookah and the threaded ring of the glass base mouth.

Ash Tray Set up Melboune Hookah
Screw Thread Glass BaseMelbourne Hookah
Click Screw Thread Technology
Ash Tray Set up Melboune Hookah

Check all parts have available and not damaged (If there are any parts missing or damage be sure to contact us immediately)

  • Glass vase
  • Stainless Steel Stem
  • Metal Downtube (Metal Diffuser)
  • Silicone Hose
  • Hose Handle
  • Top Bowl
  • Top Stem Screw( 1or 2 Parts)
  • Charcoal Ash Tray
  • Tong
  • Rubber seal on all three attachments
Shisha Setup
  1. Once you are comfortable with the cleanliness of the vase, using different water, fill up your vase to roughly halfway. If you have a vase with a taller neck, it is recommended to fill before the neck to avoid overfilling with a vase. You can fill the vase with other alternatives such as ice to alter the sensation of the flavours.
  2. Place Hookah stem/Shank into the vase. Ensure the rubber seal ring of the stem is attached to prevent the pipe falling off. If there is too much water placed into the vase, this will cause the water to overflow and leak out from the vase.
  3. To connect the Hose to Hookah Stem, attach the rubber Seal to the side of the Stem where there is a hole designed to connect the hose. Make sure the rubber is sealed tightly to prevent the hose falling off. Again, ensure the amount of water is not overflowing as it can damage the hose and be problematic for your shisha experience.
  4. To check if there is the right amount of water in the vase and the airflow is accurate, cover the top of the Hookah pipe so no air can come through. Inhale through the hose. If you manage to get air, the connection of your hose and pipe is not tight enough and retighten the pipe and hose to ensure there is no airflow.
  5. Twist the metal tray onto the pipe and then placing the bowl on top to complete setting up your hookah.

How to add Shisha flavour to Hookah Bowl

Now that you have assembled your hookah, now you are ready to prepare your herbal flavours!

  1. Placing inside the bowl, place any herbal flavour of your liking into the bowl. Break up as much herbal flavour that can fit into the bowl do not fill pass the brim as it will stick to the foil and will not get as much herbal flavour during the experience.
  2. Once you have filled the bowl appropriately, cover the bowl with foil tightly with foil.

We are almost there! Last bit, the charcoal

  1. Make sure you have purchased charcoal with your Hookah as it is essential.
  2. Depending on the intensity of the experience you would like with your Shisha, this will vary on how much charcoal is on the Hookah. We recommend starting with 2 and if 2 is not intense enough, 3 is recommended.
  3. When burning charcoal holds the charcoal using the available Tongs. Using flame, at home using the stove flame is recommended, leave the charcoal to burn until there is a glow of orange (the duration will vary depending on the type of charcoal you have). PLEASE DO NOT PUT CHARCOAL IN MICROWAVE TO BURN.
  4. Once the charcoal has burned to the amount of your liking, using your tongs, place the charcoal on top of the foil gently to prevent the foil from tearing. Try to place the charcoal close to the centre, while being mindful that the charcoal is not causing the foil to sink so much that the herbal flavours touch the foil.
  5. Now you are ready
  6. Using the hose, inhale the flavours by breathing as deep and as long as you desire. hold the flavour for as long as possible to retain that flavour.
shisha bowl

There you have it. We hope at MELBOURNE HOOKAH this helps your experience more Shisha experience more enjoyable. If you have still having issues, feel free to contact us and one of our friendly staff will be more than happy to make your shisha experience as delightful as possible.

Thread Lock System Shisha – Stainless Steel – German Design

You are currently viewing How to Set Up a Thread Lock System Shisha?